Principles of Management Essay

The fundamental aim of any given business is to make profits and maximize those profits. Organizations therefore in its day to day business activities will always aim at making the maximum profits at a very low cost of production. This basically means that a company wants to make very high profits without incurring a lot of expenses. In minimizing their cost of production while still ensuring that maximum profits are realized, sometimes companies violate regulations and laws governing them. It is therefore of utmost importance that there are other external bodies charged with the function of carrying out checks and balances to ensure that companies, businesses and organizations in general do not violate laid down regulations as they attempt to maximize their profits at very low costs of production and also that the consumers gets the products at very affordable prices and that the environment is not polluted by the by-products of the manufacturing companies. Therefore the first purpose of regulating companies is to ensure that the consumer on the ground is not shortchanged in terms of prices. This basically means that without regulations a company may charge unreasonably high prices for its products to the disadvantage of the customer. The regulatory bodies therefore ensure that a standard price for every particular product is set and companies are given a limit and extent up to which they are not expected to exceed. Should there be a violation by any company the regulatory body always steps in and takes an immediate action and if the company had no justifications whatsoever to go against the laid down regulations, disciplinary measures against the company are the next step. Business regulation is viewed by many as a way of enhancing better business environment. Regulation is also done to ensure that companies give consumers quality products for their money. It has been observed over the past years that failure to keenly monitor a company’s activities leads to recklessness and negligence by manufacturers so that consumers get very lo0w quality products. The laws governing the regulation of a company therefore provide for a regulatory body whose function is basically to check the kind of products a company produces in terms of quality. The issue of quality is almost synonymous to suitability of a product for use by customers in terms of safety. A product could be of low quality in that it is not up to the standards expected of such a product. For instance, if it is a vehicle it would be said to be of low quality if it fails to cover the mileage a car of a similar make would be expected to make. Quality is also looked at in terms of suitability so that it is important for the regulatory board to establish whether a company is making are suitable for use. For instance, if it is a company that manufactures food stuffs, then the regulatory body must ensure that the foods manufactured are actually edible and safe for human consumption. In case of medical products they must ensure chemicals used in the manufacture of medicines have no side effects on the body of a patient. In case of electronic products it is vital to ensure that the are safe so that they don’t blow up on the user of that product. It is for this reason that every country has regulatory bodies known as bureaus of standards of goods and products in general are maintained by the manufacturers. Regulation by external regulatory bodies is also done to ensure do not carelessly dispose off waste products thereby polluting the environment. Most companies if left to go unregulated would cause a l0ot of harm to the environment. This is because of the kind of waste products they produce. Most of the waste products are not only toxic but also poisonous. The regulatory bodies are therefore very instrumental in ensuring that companies treat their waste products prior to releasing them to the outside world. Better still, they ensure that even with the w3aste products being treated, they are disposed in the right place and manner. A case scenario of a company that used to produce to waste products that were toxic and then carelessly release the waste products into the open air. This in turn caused the surrounding residents great suffering as there was an outbreak of diseases. The regulatory body immediately intervened and the company was closed down indefinitely until they found a lasting solution. It has also been observed that most industries would rather drain their waste products in the water . odies notwithstanding their toxic levels so that they cut down expenses of having to dispose the waste products in the right way. This kills the aquatic animals thus destroying the environment. The regulatory bodies in such cases are very quick to ensure that no life both human and that of animals is put in danger. Regulation is also done to ensure prompt payment of taxes by companies. Every company in business in every country is required to pay taxes to the government of that particular country. This forms a source of income for the government. Most companies as discussed earlier are very evasive because their main goal is to make maximum profits. Thus they sometimes attempt to evasion of payment of taxes in order to make as high profits. It is no secret that even the consumers on the ground who are the back bone of the business field are more often than not treated very unfairly by the businessmen as they attempt to achieve their principal of maximum profit at the lowest possible cost. Manufacturers and owners of companies always want to be beneficiaries of their work at no extra cost thus tax evasion and avoidance is very common in the business field. However, they ignore the fact that by engaging in such malpractices of tax evasion and avoidance the government stands s to lose a lot in terms of revenue and as a result the country’s population suffers as the government is no longer able to sustain their needs due to insufficient revenues. Note that the manufacturers have had nothing to lose as their businesses still go on as desired. It is also important to note that failure of companies to pay taxes automatically means that a lot more will be demanded from the individuals thus suppressing the common citizen. Most people don’t find the importance of paying taxes. Tax is an obvious source from which countries can generate cash to fund human development. It is also one of the means by which they can begin to free themselves from dependence on handouts and the punitive conditions often attached to aid. Tax can also help countries determine their own route out of poverty. How Tax Policies Fleece the Poor, Christian Aid, September 2005, page6) Regulatory bodies therefore ensure that companies pay taxes as they should to avoid suppressing the poor people. Research indicates that evasion and avoidance of taxes by companies has led to a considerable increase in Value Added Tax which is the tax imposed on common goods used by ordinary people therefore placing an unfairly heavy burden on poor people. Regulation of companies is also done to ensure that employers respect labor laws put in place to protect rights of employees at the work place. More often than not employers ignore the rights of their employees thus employees are made to work under very poor conditions. Therefore the regulatory bodies in conjunction with non-governmental bodies come together in defending the rights if the workers and ensuring that companies follow the laws governing the rights of the employees to the letter. The regulatory bodies also ensure that workers are not treated unfairly in terms of wages by ensuring that they are paid above the minimum wage. It also ensures that employees are not overworked in term s of work load and the number of hours that they work. The regulatory bodies are also very keen in terms of the age limit so that companies do not employ underage employees in order to have cheap labor. Another major function of the regulatory bodies is to ensure that companies submit annual returns as they should and within the required time. The annual returns and reports contain the activities of the company for a given period usually one year and include income generated, profits made, expenses incurred and losses made. Most companies default in the submission of these annual reports and returns in order to conceal the profits made and consequently evade being taxed. They also default in submission of the reports as a way of covering up for any activity or activities carried out in the year that contravened any laid down rules. The regulatory bodies therefore step in to ensure that all companies submit their annual returns and reports and that they do so within the required time. Regulatory bodies also play a major role in ensuring that companies comply with the general requirements of operating and running of a company. This is in relation to the formation of a company, who makes the board of governors, who constitutes members of a company, shareholders and all other requirements a company is expected to comply with in its operations. The regulatory bodies are always in the frontline in the protection of investors so that companies do not manipulate them as far as investment is concerned. From the roles discussed earlier, it is very clear that a regulatory body is of great importance in the business field as it ensures that companies operate without the slightest form of flaws. From the discussion, it is very clear. From the discussion, it is clearly spelt out that companies cannot by any means regulate themselves. This is for the obvious reasons that regulations of their operations are obviously incompatible with the fundamental principle with their fundamental purpose, goal and objective of making maximum profits at the lowest possible cost. It is unrealistic and almost impossible to expect that companies will regulate themselves while it is very clear that their main objective in business and the task of regulation totally are not synonymous. It is therefore in order to conclude that if companies are left to be in charge of themselves and asked to regulate themselves while it is very clear that their many objectives in business and the task of regulation totally do no rhyme. It is therefore in order to conclude that if companies are left to be in charge of themselves, they would take advantage, exploit people and the consumer on the ground would be on the losing end. It is therefore correct to state that regulation of companies and other business organizations can only be successfully done by external regulatory bodies separate from the company itself who have no interest whatsoever in either the company or activities. Therefore it is only with the right regulatory measures that a fair playground in the business industry can be achieved. This can be achieved by ensuring that regulatory bodies are established for checks and balances of companies and business organizations at large. Regulation by eternal regulatory bodies has also played a major role in establishing fair and healthy competition among businessmen therefore has a level playground to do their business.

Compiler Design 2

Outline s Refreshing †¦ Uncensored †¦ Groundbreaking †¦. The Dr. Wang’s original lecture: s s s s s Tutorial of Design Compiler s s Introduction Setting Up the Tutorial Graphical Interface The Alarm Clock Design Setting Design Environment Setting Design Constraints Overview of Optimization Phases Analysis of Report DC Tutorial – 2 Introduction s s s Introduction s s s s The Synthesis Process Design Compiler Products Synthesis Programs and Tools Design Styles Input and Output Formats User Interfaces Script Files DC Tutorial – 4 The Synthesis Process Start Rewrite Verilog Code Read in Design Set Attributes Set Realistic Timing Goal Check Design Errors No Yes Fix Bugs Change Constraints Modify Compile Attributes Ungroup Design Blocks The DC Products s DC Professional – No multi-frequency clocking, latch-based time borrowing, pipeline re-timing, critical path resynthesis, in-place optimization, and incremental editing s DC Expert – Include features for maximizing performance s FPGA Compiler – Targets only FPGA technology Optimize No Good? Yes Done DC Tutorial – 5 DC Tutorial – 6 1 Synthesis Tools HDL Design Analyzer HDL Compilers DesignWare DesignWare Developer Architectural Optimization s s Architectural Optimization Gate-Level s s Design Analyzer Logic Optimization Design Compilers Cell Library Library Compiler s s Arithmetic Optimization Timing and Area-Based Resource Sharing Sub-expression Removal Constraint-Driven Resource Selection Inference of Synthetic Part (DesignWare) For more information – HDL Compiler for Verilog Reference Manual Optimized Gate-level Netlist DC Tutorial – 7 DC Tutorial – 8 DesignWare s DesignWare Developer Provide a library of high-level design components – Adders, Multiplier, etc. s s The HDL compiler will select the proper components for you based on your timing and area goals See Documentation Collection (open collection) – Synopsys DesignWare 1997. 01 s Create DesignWare Libraries DC Tutorial – 9 DC Tutorial – 10 DC Products s Cell Library s Library of basic cells used by DC – AND, OR, XOR, etc. s Optimize your design at the gate level Using selected cell libraries s For FPGA compiler, it may contain more complex cells – Xilinx CLBs, IOBs, etc. DC Tutorial – 11 DC Tutorial – 12 2 Library Compiler Design Styles s Yes, you can create your own cell libraries s s Hierarchical or Flatten Combinational or Sequential DC Tutorial – 13 DC Tutorial – 14 Input Formats s s s s Output Formats s s s s s VHDL Verilog PLA & EDIF 2. 00 Xilinx XNF s Synopsys binary format (. db files) VHDL Verilog EDIF 2. 00 Equation, LSI Logic, Mentor Graphics, PLA, state table, Tegas formats Xilinx XNF format DC Tutorial – 15 DC Tutorial – 16 User Interfaces s Scripts s shell> dc_shell – – – – – – – – – unix-like command shell dc_shell> quit dc_shell> cd my_dir dc_shell> alias wv write -f verilog dc_shell> pwd dc_shell> history n dc_shell> list -command dc_shell> man dc_shell> sh â€Å"lpr † s s s s shell> design_analyzer graphical interface DC Tutorial – 17 A set of command can be put together into a file called â€Å"script† Then, you don’t need to re-type some the commands again and again when using the dc_shell Scripts for this tutorial will be provided for your reference You can run them when you are home without the X-window capability DC Tutorial – 18 3 Locate Documentation s s s s s s s shell> design_analyzer & select Help –> On-Line Documentation †¦. Ignore the square window with â€Å"Titles† – select Cancel to close it – focus on the one with â€Å"File, Edit, View †¦Ã¢â‚¬  select File –> Open Collection select Synopsys Synthesis Tools 1997. 1 and then click OK select Documents Formatted for Printing and then click Open In the â€Å"File, Edit, View †¦Ã¢â‚¬  window, now you can select a list of on-line documents DC Tutorial – 19 Setting Up the Tutorial Setting Up the Tutorial s s s s Creating The Directories s >cp -r /baby/synopsys/doc/syn/tutorial . Home Directory tutorial Creating the directories Setting paths and aliases Creating a start-up file Running tutorial with scripts db/ verilog/ vhdl/ appendix_A/ Script files work (empty) DC Tutorial – 21 DC Tutorial – 22 Path s s .synopsys_dc. s etup file %> source /usr/local/bin/setup. synopsys Or you can put it in . cshrc file – %> source . cshrc – %> rehash s s You can take a look of the setup file – %> more /usr/local/bin/setup. synopsys s Creating a . synopsys_dc. setup file can overwrite system default settings %> cp ~/tutorial/. sysnopsys_dc. setup ~/. synopsys_dc. setup %> vi ~/. synopsys_dc. setup – company = â€Å"Motorola Somerset†; – designer = â€Å"CEO†; – view_background = â€Å"while†; s It basically setup the right environmental variables for you DC Tutorial – 23 DC Tutorial – 24 4 More about setup file s Scripts s s %> more . synopsys_dc. setup – search_path = { } + search_path – link_library †¦ target_library †¦ symbol_library †¦ define_design_lib †¦ s s s s s search_path = {a directory} + search_path – if you cp tutorial into a directory other than home link_library: location of subdesgins referenced by the design target_library: identify technology libraries symbol_library: identify symbols library for generating/viewing schematics define_design_lib: identify a temporary place to store intermediate files created by the analyzer DC Tutorial – 25 No X-Window, No Problem Find script files in ~/tutorial/appendix_A/. See Design Analyzer Reference Manual for more detail DC Tutorial – 26 Graphical Interface s s Start: %> design_analyzer & Quit: Select File –> Quit Menu Bar Graphical Interface View Buttons Level Buttons Scroll Bar Message Area (view_background = â€Å"while†;) View Window DC Tutor ial – 28 Mouse Buttons s Check Default Setup s Setup –> Defaults †¦ Left Button – Select design and design objects s Mid Button – Add or remove objects from a group of objects already selected s Right Button Bring up the pop-up menu DC Tutorial – 29 DC Tutorial – 30 5 Read in a Design s Save a Design s File –> – analyze & elaborate – read File –> Save or Save As †¦ – Once a design is selected s analyze : – read in VHDL/Verilog; check for syntax and synthesizale logic; store as intermediate formats – Use to read each sub-design + top level design s elaborate : – create the design from intermediate formats; determine the correct bus size; Use for top level design + sub-design with parameters passing in s read : read design formats other than HDL (db, PLA, tc. ) DC Tutorial – 31 DC Tutorial – 32 A Design Has 4 Views s s s s s Design View s Design View Symbol View Sc hematic View Hierarchy View T View (No Use) After â€Å"read† in all 13 verilog files in the tutorial directory – you first enter the Design View DC Tutorial – 33 DC Tutorial – 34 Symbol View s Schematic View s Select TIME_STATE_MACHINE and double-click on it -> you enter the symbol view of the design Click on the â€Å"schematic view† button on the left hand side DC Tutorial – 35 DC Tutorial – 36 6 Hierarchy View s Design View Icons s s s s Click the up arrow (left hand side) to go back to design view; doubleclick on TOP; Select View –> Change View –> Hierarchy – TOP contains 6 modules Netlist: read in as a netlist and optimized to gates Equation: In VHDL, Verilog, or equation format that is partially or completely behavioral PLA: Specified in PLA format State Table: Specified in state table format Y=A+B 010-0 1-101 PLA State Table Netlist Equation DC Tutorial – 37 DC Tutorial – 38 Command Window s dc_shell Commands Setup –> Command Window †¦ s For more information, – see Design Compiler Reference Manual: Fundamentals DC Tutorial – 39 DC Tutorial – 40 Design Attributes s Operating Environment Sub-menu s Attributes are values you set to control the optimization process – Select Attributes from the menu s The Attributes menu provide access to – – – – – – – Set input and output delays Set drive strengths set loads Characterize subdesigns Select operating conditions Choose a wire load model Create or modify a clock DC Tutorial – 41 Set design properties that describes the internal conditions of a design and the design’s interaction with its surrounding – drive strength on ports – the time that signals arrive on ports – load driven by output ports DC Tutorial – 42 7 Optimization Constraints s Design Optimization s Set the goal for design optimization – largest delay allowed – greatest area allowed Select Tools –> Design Optimization – See Design Compiler Reference Manual: Optimization and Timing Analysis for more detail s Two set-constraint windows – Design Constraints window †¢ Goals for area and power †¢ Design rules implied by technology library †¢ Test-related constraints (testability) – Timing Constraints window †¢ Timing constraints s DC Tutorial – 43 DC Tutorial – 44 Locating Problems s Generate Report s Before and after optimization, use Schematic View and Check Design to locate problems – Generate schematic view – Select Analysis –> Check Design – Jump to a design object †¢ Click on an error or warning message in the Design error window †¢ Click on the show button Analysis –> Report †¦ DC Tutorial – 45 DC Tutorial – 46 Run a Script File s Setup –> Execute Script – check out ~/tutorial/appendix_A/*. script – dc_shell> include The Alarm Clock Design DC Tutorial – 47 8

THE ECONOMIC IMPACT OF THE TELEGRAM IN THE UK Research Paper

THE ECONOMIC IMPACT OF THE TELEGRAM IN THE UK - Research Paper Example To the Victorians, the telegraph was a symbol of man’s power over nature. The Telegraph became a special tool that enabled and enhanced commercial and imperial expansion. Morus (2000) observes that it was not by coincidence that the financial speculators became the first and most prolific users of the telegraph. Moruss observation reveals the economic significance of the Telegraph. The telegraph was also an important tool to the military that came to know of its potentials soon after its invention (Conboy & Steel, 2015). The Telegraph penetration was happening in the time of Crimean War in the mid-1950s. The telegraph enabled the military to get access to front-line events. In general, the introduction of the telegraph broke down the barriers of space and time. The telegraph provided the United Kingdom community with an intelligence-gathering capacity which translated into economic value. The adoption of the telegraph has been summarized well in the words of Morus (2000) who named it â€Å"The nervous system of Britain.† This study looks into the economic influence that the telegraph made in the United Kingdom. For the UK population, the telegraph held out boundless potentials. With the introduction of the telegraph, Britain was able to gain control of its colonies. Britain gained an upper hand over other colonizers when it came to controlling several colonies. A connection exists between the telegraph and the expansion and consolidation of British colonial power in the nineteenth century (Conboy & Steel, 2015). The Imperial system of the telegraph communication created efficient communications between the British government and its colonial possessions. Telegraph both shortened communication times between countries of the Empire and centralized control in Whitehall. The shortening of communication times reduced the autonomy of colonial administrators. Morus (2000) argues that the telegraph played a crucial role in imperial expansion. The colonialist Britain

Day for Night (1973) Movie Review Example | Topics and Well Written Essays - 750 words - 1

Day for Night (1973) - Movie Review Example In a nutshell, the film delves into the intersecting stories of the cast and crew that are working on the set of a movie. Truffaut eschews linear storytelling in favor of a more anthological approach. Truffaut himself narrates the film lending a sense of cohesiveness to the overall piece. To his credit, he is able to bring a general sense of narrative to the resulting interweaving storylines from the film’s ensemble cast of characters. The film eventually culminates with a few plot twists that will no doubt surprise all but the most keenly observant audience members. By the film’s conclusion, Truffaut makes it quite clear that his satire is meant to be his way of expressing his love for his craft and filmmaking as a whole. In fact, Festa (2012) sums it up quite nicely when he said that â€Å"for folks behind film looking glasses, their day job is life itself†. Doubtless, the film’s ensemble cast of characters is one of its greatest strengths. Truffaut succeeds in gathering a memorable set of characters. Between the over-the-hill screen legend, the aging ex-opera singer, the handsome young lead and the sexy female vixen who is recovering from a nervous breakdown, what’s not to love? Ebert (1997) points out another of the film’s strength lies in the numerous â€Å"behind-the-scenes† moments. The audience is shown the tricks behind a lot of moviemaking magic such as the use of filters to make daytime scenes look like they were shot at night and fake snow to name a few. These might be a touch old hat for a modern audience, but that certainly does not diminish their charm. Truffaut also manages to underscore a lot of the things that tend to go wrong during production. The sort of things moviegoers do not see when they watch the finished product such as actor’s temper tantrums, animals missing their cues and so forth. It is more than likely that similar films such as Ed Wood drew inspiration from Truffaut’s piece. Despite its many strengths the

Ticks and the Lyme Disease Essay Example | Topics and Well Written Essays - 1250 words

Ticks and the Lyme Disease - Essay Example Lyme disease is one of the major disease transmitted by the tick, the tick however only acts as the agent and the main reservoir of the disease causing bacteria are rodents and birds, this disease is in sometime relatively difficult to diagnose because the symptoms are similar with those of other viral infections, however the unique symptom is the red rash that appears but may not appear in all individuals infected. Ticks have four developmental stages and this include the egg which develops into larva, the larva develops into a nymph and finally the nymph develops into an adult, in order to develop to the next stage a tick has to feed on blood, the nymph ticks have 6 legs but when they have grown to the last stage the number of legs increase to eight legs, the inability to jump or fly makes them wait for their host in areas where the host frequent. Therefore Ticks are mostly found in tall grass where they wait for their host, they attach to the host foot and climb up the host and find an appropriate spot where they attach themselves on the skin of the animal, for a few days they will feed on blood until they are full where they will drop off the animal. The disease is usually transmitted by ticks in the nymph stage, this is because the adult tick is easily detected and removed. Ticks that transmit the disease carry and transmit Borrelia bacteria. However the tick may also carry other parasites which cause the other tick borne diseases, The Borrelia bacteria have a life cycle and rodents and birds act as reservoirs of the bacteria, the rodent and bird feeding ticks will take a blood feed and transmit the bacterial to humans, as a result the ticks are only agents of the bacteria. This bacterium is susceptible to many antibiotics especially if treatment is delayed. Parts of the body they infect: Ticks will feed on a host, the tick will stick on the skin of a host and take a blood feed, this leads to a bacteria infection which passes on to the bloodstream of the host, a red spot appears at the point where the tick bites and this is due to the Borrelia bacteria infection. The Borrelia bacteria invade cultured cells which include Fibroblasts, Endothelium, Lymphocytes, Keratinocytes macrophages and neuronal cells. By hiding in these cells the bacteria is able to invade the immune system and therefore treatment with antibiotics becomes difficult. When treatment is delayed the bacteria causes a chronic infection because it evades the immune system. How illness is contracted: During the first stage of infection the red rash appears on the spot where the infection occurs, this rash becomes larger over time in some time other spots may appear in other parts of the body, weeks after infection the bacteria enters the blood stream and therefore the rashes may develop in other parts of the body, migrating muscle pains, joint pains may also be experienced as the infection spreads in other parts of the body. Changes in the heart beat may also be experienced and this may cause dizziness as infection spread. Symptoms: In the first stage a red rash appear on the bite site which is painless, however it is estimated that one

Nurses Attitudes towards Euthanasia Research Paper - 1

Nurses Attitudes towards Euthanasia - Research Paper Example Nurses must deal with these problems keeping in mind the legal and professional implications of making any decision. A nurse must constantly combine â€Å"ethical reasoning and clinical judgment† (Nelson. 2006).   Medicine and advances in science and technology have led to an improvement in the quality of life and have resulted in the prolongation of the lifespan of an average person. This, in turn, leads us to one of the biggest ethical debates that nurses face and that is with respect to the withdrawal of care leading to a patient’s death or euthanasia. In Belgium and the Netherlands, laws declare that euthanasia is legal â€Å"under carefully delineated circumstances† and the Belgian euthanasia act defines it as the â€Å"administration of lethal drugs at the explicit request of the patient with the explicit intention of shortening the patient’s life† (Berghes, Casterle, & Gastmans, 2005). Nurses are involved in end of life care and its withdrawal or administration of lethal drugs internationally and so their position in this ethical debate is very important and brings them to the front stage. End of life care poses ethical dilemmas for nurses because it is hard for them to witness suffering and they have the urge to end it. In addition, there are inadequate resources like few hospital beds in the Intensive Care Unit, different value judgments and the moral distress in ending a person’s life despite their request for the nurse to do so (Oberle, Hughes, 2001). This debate has ethical, cultural, religious, moral, and legal nuances that add to the nurses’ distress.   The key element in this debate is the fact that autonomy is very important as stated in the Belgian euthanasia act too.

Murderous Monsters Research Paper Example | Topics and Well Written Essays - 750 words

Murderous Monsters - Research Paper Example The media’s extensive coverage of the atrocious crimes exacerbates the public’s preoccupation with the perpetrators, as the former struggles to understand the character deficiencies or motives that drove the latter to perpetrate such crimes. Consequentially, this alters people’s perception of perpetrators’ guilt before and after the court issues a verdict. Charles Sobhraj, infamously known as â€Å"the serpent† was a half-Vietnamese and half-Indian serial killer credited for allegedly killing Western tourists who he befriended while hiking along the Hippie trail in Asia. Finally arrested after his plan to murder sixty French tourists backfired, Sobhraj was arrested and convicted to serve an eleven-year sentence in India. The short prison term was because authorities lacked sufficient evidence to tie him to the homicides. Sobhraj completed his prison term in 1997 and went on to sell the rights to his life story to a movie producing company in 2003. Excited to live out the rest of his life in luxury with his newly acquired fortune, Sobhraj’s murderous instincts got the better of him whereby, he was arrested in 2004 and convicted for the murder of two North-American tourists. He continues to serve his life-long prison sentence in Nepal where he continually plans his escape. In all the cases, it is apparent that the media showed heightened interest in chasing the story despite the atrocious crimes perpetrated by the serial killers. The ultimate goal of the entertainment companies was to satiate the public’s exaggerated thirst for drama-filled television content. They do so at the expense of the victims who lost their lives to these inhumane criminals, and the family and friends of those victims. The fancy pseudo-names given to these criminals by the media have also functioned to glamorize and sensationalize their actions while peaking the public’s interest. The cases featured in the essay are from different

Leading in Teaching, Learning and Mentoring Practice Essay

Leading in Teaching, Learning and Mentoring Practice - Essay Example Moving onwards to the role of a teacher as a leader in the educational settings, it can be further elucidated by considering the major roles of a teacher leader as explained by Harrison and Killain (2007). Through their work, they have emphasized the role a teacher can play in the lives of their pupils both by working along with his colleagues and also himself directly. Some of them include role of a teacher as a; Participative leadership- through which the teacher leader himself becomes a part of the change being brought about and is in a better position to collaborate with his fellows in achieving a set target A teacher leader is different from a school leader. He enjoys authority and power of a more expanded nature. Through formal and informal efforts, a teacher leader can collaborate with his colleague and even the head of the institution for the betterment of the educational setup. While in the work environment, a number of incidences are encountered which further strengthen the statement that a teacher plays the role of a leader. Two of such cases are elaborated in the subsequent paragraphs. I had the opportunity to work in Meadow High School and teach autistic children with special needs. During my stay there as a teacher, I came across the ways in which these children were being dealt with. While some of them were commendable, I found certain aspects of interaction and teaching lacking there. The school plans and teaches to a mainly primary model which prepares the student for an entry level qualification, although there are opportunities for the students to gain GCSE’s and A levels if the students are able to do so. In recent years the needs of students have become more complex as was witnessed by me during my interaction students which all had Autism of a moderate to complex level. ‘Autism is one of the most common developmental disabilities in the world, affecting approximately 1

Marketing 4p assigment Essay Example for Free

Marketing 4p assigment Essay INTRODUCTION 1. 0 BACKGROUND OF THE ORGANIZATIONS: Backed by more than 20 years of experience in Japan, Sushi Zanmai possesses extensive expertise for raw materials selection. Base on the nature of Business is classified as Food Beverage industry. The purpose of their business is serves the best food and services to each customers. Genuine ingredients coupled with original recipes and original taste, they provide more than 100 assortments of sushi and 100 varieties of cooked food that are authentically Japanese. They now have 10 outlets in Malaysia which is at Sunway Pramid, One Utama, Garden Mall, Low Yat Plaza, Paradigm Mall, Fahrenheit 88 and 1 Month Kiara. They have their own wedsite for customers more easily to find out the most nearby location and know what is new on that month. The main selling product is sushi other that they also have sell noodles, rice set, desserts, and beverages. That sushi of colour plate starts from RM1. 80. 2. 0 THE PRODUCT OF SUSHI ZANMAI Sushi Zanmai is originated from Japan. They are offering the combination of tangible goods and services in their business. They provide traditional Japanese foods and services on their business. They business are on direct sell foods to customers. They have serves appetiser which the Japanese meal begins with a visual feast of chilled and warm appetisers, like: Salmon roe Japanese omelette Potato Mayonnaise Sushi Zanmai created own specialties featuring the freshest, handpicked ingredients provide a fresh, contemporary spin on much-loved favourites, exquisitely tailored to suit local taste preferences such as, Sanshoku Hana Salmon Caterpillar Roll Wasabillar Roll The traditional entree consists of expertly-sliced raw fish, shellfish or mollusks, complemented perfectly by the combination of wasabi and soy sauce, and often accompanied by pickled ginger, example Salmon sashimi Toro sashimi Maguro sashimi According to survey, most of the female prefer sushi salad that the reason Sushi Zanmai products include various types of Salad to let customers choose too. As you can see the three popular salad dishes are Sashimi Salad Salmon Salad Kaiso to Tofu Salad Rolled sushi in Japanese language is pronounces maki. It usually comprises of seafood which may or may not be raw, vinegared rice and paper-thin seaweed. For example, Salmon Maki Soft Shell Crab Maki Natto Maki Follow that, they do have Temaki. The â€Å"te† in Temaki means hand is Japanese language. The Temaki sushi is two- fold. It not only refers to a hand roll that is made entirely with the hand, without the traditional bamboo mat. The cone-shaped Temaki sushi is ofeten prepared as an appetizer. Soft Shell crab Temaki Ikura Temaki Unagi Temaki Other than that, noodles are also usually customers will order it. They have provide three types of noodles one is soba which is made from wheat flour, Udon made from wheat flour, Ramen made from Chinese wheat flour and served with a wide range of soup stocks such as soy-sauce base and salt base. Sansai Udon Niku Ramen Kakaiage soba Donburi a dishes consist of a deep bowl of rice topped off with chicken, beef or seafood cooked in a variety of styles and sauces. They have, Curry Rice Unadon Ebidon In beverages, they served many types of drinks like Green Tea, Calpis Smoothies, fine Japanese Sake, Soft Drinks, Japanese Plum Wine and others. Green Tea (unlimited refill) Ichigo Smoothies Choya Extreme A dessert to end the meals. It have multiple choice as well as, Macha Macha Parfait Itachoco Monaka Stawberry Parfait For the level of the product and services, Sushi Zanmai is selling the product which is categories in actual product. They have their own brand name, design, packaging that deliver the core benefit to customers. They are selling high quality level product that most of the ingredients are import from Japan such as Salmon, tuna, sea bream, Eel and etc. Besides, Sushi Zanmai are selling the shopping product goods which is one of the important consumer goods in market. There have few reason because of Sushi Zanmai’s product is belong to shopping product. Sushi Zanmai of products is consumers purchase and consume on a less frequent schedule compared to convenience products. Normally, they opened their business inside the shopping mall and which is high class and crowded shopping mall. They will do more selective when choosing distribution outlets to sell their products. However, customers are willing to spend more time locating their products since they are relatively more expensive than convenience products and because these may process additional psychological benefits for the purchaser, such as raising customers status level within their social group. 3. 0 THE PRICING STRATEGY THAT USED BY SUSHI ZANMAI Sushi Zanmai has successfully follows the price skimming strategy when setting the price of its products. The price skimming strategy allows Sushi Zanmai to charge a price that is above the competition, but also promote frequent sales to lower the price below them. Different groups of customers are willing to pay different prices for the same product. Sushi Zanmai can sell â€Å"The Extreme† to the customers who will pay the higher price to be the first to buy and also to the bargain hunters. Finally, this strategy will emphasize the product and service quality. Sushi Zanmai sets a high initial price for its products to send a signal to customers that its products are quality and the service is excellent. Next, Sushi Zanmai also using price line and price bundle as the pricing strategies. Product Line Pricing They have selling same product of food but different categories. Every guest has different taste and love different type of cruise that the reason Sushi Zanmai has to classify as well. Certainly, different materiel of food sure is different price charging. For example: Sushi Name Ingredients Price Inari Sakura Shiitake fish floss RM3. 80 Kaki Fry Roll Friend oyster sushi roll topped with mayonnaise RM9. 80 Dragon Roll Fried prawn sushi roll topped with avocado RM12. 80 Rice Name Ingredients Price Ebidon Deep fried prawn with egg on rice RM8. 80 Chiken Katsu Curry Chicken cutlet and rice with curry sauce RM10. 80 Unadon Roasted eel on rice RM15. 80 Noodles Name Ingredients Price Tsukimi Udon or ramen noddles with egg RM6. 80 Sansai Udon or soba noodle with vegetables RM8. 80 Curry Udon or ramen noodle with chicken curry RM10. 80 Product Bundle Pricing Sushi Zanmai has offering set promotion to attract more guests to purchase their products. Set promotion is type of bundle strategy. It can let guests feel the price is lower or cheaper but just have in certain and limited lime for it, like: Chicken Keraage Don and ice lemon tea for only RM7. 90 As manager will be considered in a few points when setting the bundle pricing strategy: Customer demands, sort out which is the product of the guests prefer or like it. Customers always pursue cheaper price, Target profit; make sure will reach the target. 4. 0 PLACE OF SUSHI ZANMAI Location is very important to those in Food and Beverage industry, as the product they sell is shopping product, the customers should not be able to take far complications to reach their shop. Normally, Sushi Zanmai chooses to open their new outlet inside the shopping mall that those people visit regularly. Below as those outlets of Sushi Zanmai in Malaysia : †¢SUSHI ZANMAI, SUNWAY PIRAMID †¢SUSHI ZANMAI, LOW YAT PLAZA †¢SUSHI ZANMAI, 1 UTAMA †¢SUSHI ZANMAI, THE GARDENS MALL †¢SUSHI ZANMAI, FAHRENHEIT 88 †¢SUSHI ZANMAI, 1 M ONT’KIARA †¢SUSHI ZANMAI, PARADIGM MALL One of the outlets of Sushi Zanmai in K. L Distribution Sushi Zanmai’s distribution channel is a direct channel as they are selling their product directly to the customers. Their distribution channel is considered as a direct channel, and it is the best suitable method to do for selling sushi, udon and beverage to the customers. As Sushi Zanmai are being in food and beverage industry, the best way to serve their customers is by serving them nicely and directly. The shopkeepers who are preparing meal in front of the customers 5. 0 PROMOTION OF SUSHI ZANMAI Sushi Zanmai are using promotion methods which are Advertising and Sales Promotion. For advertising promotion purpose, they have created a web page over the internet that those people could get the information which about them with visiting their web page. Other than that, for the reasons of nowadays most of the people are having an account on facebook, so that they have created a facebook web page to be distributed among the facebook page. The facebook users or customers might do a feedback or recommendations that about them through their facebook page. Web page of Sushi Zanmai Sales promotional sets will be made to promote their products to let the customers try and enjoy their product and to create strong customer relationships by promoting personally and friendly service. Their popular promotional methods are: Have 50 % discounts for only these 4 types of items. The duration of this promotion is just for one week. Sushi Zanmai have did the promotion that shown as above. The customers will get a Chicken Karaage Don for only RM 6. 80 after finish the steps that set by them. Free RM 20 Sushi Zanmai voucher for those customers whom spend RM100 or above in any of their outlets. The duration for this voucher is just for one month. 6. 0 Improvements in 4p’strategies of Sushi Zanmai Product Sushi Zanmai should activate the strategy of product development and come up with new products from time to time as it is important to maintain the preference of the customers with the new developed products. For example, the organization can come up with new type of rice and new sushi flavour or developing new menu items in single orders such as Udon and etc. Place Shopping mall actually is a not bad idea for open a restaurant but also need to careful about the visibility. A restaurant that is located on a crowded place has high visibility. Conversely, a restaurant nestled on a not crowded place will always battle a disadvantage simply based on its location. Pricing Sushi Zanmai should be try not setting too higher price to attract more other guests purchase your product and also can earn more profit. Promotion Sushi Zanmai can also be improved by creating more value sets that prompts the customers to try out the new products made for specific period as a special promotion during particular season such as Valentine’ Day and Merry Christmas or holiday season value sets for example Advertising on TV Sushi Zanmai shoud has advertising on TV. Television is the most powerful advertising medium available. The largest corporations around the world use it to build their brands, bring customers, add credibility, and grow their businesses. Delivery Services Add delivery services. It can help a company gaining popularity and becoming more available. 7. 0 Conclusion In conclusion, i would like conclude by listing the 4p’strategies that regarding of is price, place, promotion and product. They are offering the combination of tangible goods and services in their business. In setting pricing the Sushi Zanmai is using price skimming for their products. For the place and distribution, The Sushi Zanmai is use direct as their channel. Moreover, the Therefore, Sushi Zanmai should improve its product quality and take considered action in order to improve the sales as expected.

Police and the Use of Excessive Force Essay Example for Free

Police and the Use of Excessive Force Essay The use of excessive force by police organizations around the world as a crime control mechanism has been widely criticized and debated for many years. Many ask, what exactly is excessive force? What causes an officer to use excessive force and is it justified? There is much ambiguity when it comes to answering such questions. Your perception will undoubtedly create your expectation and too many times one’s failure to acknowledge, ‘the other side of the story,’ causes a misperception. How big of a role do the media play in portraying police use of excessive force as fair or unnecessary? These are all valid questions that will be addressed in this analysis as well as what is being done to address the situation. We begin with the definition of excessive force as provided by the International Association of Chiefs of Police, â€Å"excessive force is the amount of effort required by police to compel compliance by an unwilling suspect† (Police use of Force, 2009). That is, police will turn to excessive force when an individual has been uncooperative. Some argue that the police’s most defining feature is their capacity to use coercive force (Katz Walker, 2008). Police use of force may include physical force as well as the power to arrest, but most importantly the power to use deadly force. It is important to keep in mind that there are laws set in place to limit the amount of force an officer uses, including excessive force. Such laws have allowed for better policing practices and an improved police/community relationship. Although police use of excessive force still arises from time to time, the number of incidents has dropped dramatically over the years. According to a study done in the years 1999 and 2000 of calls for service, force was used by police in less than one percent of the calls (Police use of Force, 2009). In actuality, the police spend most of their shift serving their community as peacekeepers as  well as helping others. So what drives a sworn police officer to use excessive force? The answer to this question is not a simple one, and rightfully so. Some argue that discrimination, stereotyping and the environment in which a n officer may patrol can contribute to the use of excessive force. People call the police because they want an officer to settle a problem: to arrest someone, to get someone to calm down, or to have someone removed from the home (Katz Walker, 2008). In other words, police are constantly put in volatile situations where the people they are dealing with can become a danger to the officer who is responding to a call and there is no telling what someone might do at any given moment. Often times when an officer has been dispatched to a scene, particularly an altercation, tempers are already flaring and what would normally be a situation calling for a simple mediation performed by the officer can easily escalate to the citizen resisting arrest for fear of going to jail, not knowing that the police is just trying to calm down the individual in order to assist with the situation more accurately. Situations like these are all too common and police can feel very much unappreciated and a sense of disrespect on behalf of those they serve. This frustration often times lead to a small number of officers easily losing their temper when confronting citizens in future instances. It must be pointed out that such instances are rare, but still do a rise from time to time. As a retired police lieutenant reflecting on his career put it, ‘The majority of cops were good, hardworking, conscientious individuals. They cared, and they wanted to do a good job. But there were enough cops—not one rotten apple, but several rotten apples—to give law enforcement the taint it had received’ ((Retired), 2000). The media, which include movies, television shows, and news organizations, have a lot of power when it comes to portraying the police as good or evil. Given the considerable ambiguity that surrounds the issue, whether police use of force is presented as police brutality and whether brutality is understood as a problem depend greatly upon which voices and views the media emphasize (Lawrence, 2000). It is the media who determine what the general public learns about street cops’ daily experience with criminals and the underclass, as well as what the middle-class public learns about other groups’ experiences with police (Lawrence, 2000). A perfect example is the famous reality television program, ‘Cops,’ where camera crews  participate in ride-along a ssignments and capture real life drama from the police officer’s viewpoint. News headlines are one of the most, if not the most, influential media forms influencing public opinion and attitude towards law enforcement. As the lawyer for a Miami policeman acquitted in the shooting death of a black motorcyclist—an acquittal that touched off days of rioting—indignantly told reporters, â€Å"If the headlines read, ‘Twice-convicted drug dealer shot while trying to run over officer,’ there wouldn’t have been any riots† (Lawrence, 2000). So the question arises, what is being done to address the situation with police use of excessive force? History has shown that policing systems and strategies can and do change. One way the situation has been dealt with in recent years is with the creation of local citizen oversight groups where complaints by citizens are reviewed to determine whether the action taken by the officer towards the individual filing the complaint was caused by a lack of policy, or a bad policy, on behalf of the police department in which case a recommendation for a new policy is sent to the department. Another way that police departments are dealing with the situation is by mounting video recorders on patrol cars as well as working with the local media and using them as a way of checks and balances. There is also the case for higher education for police officers. The subject matter of higher education as a requirement for police officers is a hot debate topic today. Study has shown that higher educated cops receive fewer complaints than those with less education (Victor E. Kappeler, 1992). Works Cited (Retired), L. A. (2000). From the Inside Looking Out. In J. Nelson, Police Brutality (p. 265). New York: Norton. Katz, C. M., Walker, S. (2008). The Police In America. New York: McGraw-Hill. Lawrence, R. G. (2000). The Politics of Force. Los Angeles: University of California Press. Police use of Force. (2009, August 04). Retrieved March 19, 2010, from National Institute of Justice web site: http://www.ojp.usdoj.gov/nij/topics/law-enforcement/use-of-force/welcome.htm#note1 Victor E. Kappeler, D. C. (1992). Police Officer Higher Education, Citizen Complaints, and Departmental Rule Violation. American Journal of Police , 37-54.